DubaiCNC.com - Ajman FET [ Mail: cnc@cncdubai.com]

CNC Machines-Services-Spares-Upgrade Retrofits _Precision Parts_Since 2003

Saturday, May 19th

Last update03:31:49 PM

Welcome to DubaiCNC

Email:cnc@cncdubai.com

Welcome_सुस्वागतम

Email:cnc@cncdubai.com

or cncdubai@gmail.com

Tel: 00971-6-7457860

Fax: 00971-6-7421336

Skip to content

You are here:

Skip to content

Brands_CNC_PLC_AC/DC Servos_Encoders..

CNC PLC Spare parts-Obsolete Controls

Secondhand Refuribshed CNC M/c

Custom Made Parts on CNC at UAE Workshop

Sourcing of Parts from India

Stainless Steel/Alloy Steel Turned Parts

"Stainless Steel/Alloy Steel" Turned Parts Custom made - as per your Drawing

Stainless Steel or Alloy Steel CNC Turned Parts Custom made - as per your Drawing

We manufacture Turned parts as per your Drawing. We also do Reverse Engineering and manufacture as per your sample.We have CNC Lathes/Milling in our UAE workshop Capable of Turning upto Dia 560mm /Lengh 1250mm and Milling is Too Large...capable of Length. This capacity means that we can cater to almost all your Turned Parts Requirement in Brass.

Bar Turned Stainless Steel or Alloy Steel Components: If your job requires Turning from Steel Shafting Bar / Steel Ground Bar - Our CNC Machines in UAE have a big bore spindle that can accomodate upto 65mm Rod. Additionally we can do the Bigger jobs by holding in Chuck.

Betwen Center Stainless Steel or Alloy Steel Components Turning : If your Job Requires Between Center Turning - Our CNC Machines can accomodate jobs of Dia 560 mm and upto 1250 mm in Length.

Secondary Milling Operations on Stainless Steel or Alloy Steel Parts: Also We can do secondary machining operations on bTurned Stainless Steel or Alloy Steel parts e.g. Milling/ Drilling etc. Our CNC Milling Machine is equipped with additional 2 Axis capacity (Rotary/Tilting Axis)- This way we can manufacture any Complex Machining Shape.

Turned parts from Stainless Steel or Alloy Steel Casting/ Stainless Steel or Alloy Steel Forgings : Not to Worry...the cost of Stainless Steel or Alloy Steel Forgings/ Castings is prohibitively high in UAE.. and many a times it is either mandatory or economical to turn the parts from Forged / Cast rough Stock. For Turned components - We get Forgings/ Castings as per Job requirement from India. We source from the Most economical sources. We can get the Forgings/ CAstings turend in india or can do the CNC Turning at UAE.

Screw Machined Parts : TRAUB If you look for Screw Machined Parts made out of Stainless Steel or Alloy Steel . Our indian office is capable of sourcing any type of Screw machined Parts.

Forging blanks to increase Material savings, machining economics, production efficiencies and to reduce rejection rates we not only machine from bar stock but also source Forged blanks for Machining Customer components as per job requirements

As per your Drawing and final Forged machined components we source the Open Die Forgings. Our Forging suppliers are based in india they are producer of open die forgings, seamless rolled rings, and contoured rolled rings up to 160"/4050mm outside diameter.Forging shapes include discs, hubs, blocks, shafts (including step shafts or with flanges), sleeves, cylinders, flats, hexes, rounds, plate, and some custom shapes.Forgings can be procured as finished size, finished size rough machined, forged size, forged size rough machined, as forged size, or as forged size with allowance to finish to your finish size. Seamless rolled rings and contoured rings are produced to save on material and machining costs.

We also have Machining facilities both in india and in Our Own Workshop in UAE to machine forged shafts, sleeves, flats, hexes, rounds, rings etc. to Finish Turned Parts sizes..as per customer demands.

In House Capability at UAE

We have 3 CNC Lathes German INDEX make to cater to Job dimensions upto Dia 550mm and Lenghts upto 1250 mm. ;

Contact us with your Drawing and / or Sample. and we can quote you the Turned part Job at the lowest price.

We cater to markets in United Arab Emirates- Dubai, Abudhabi, Sharjah, Ras Al khaima, UAQ, Oman, Bahrain, Qatar, Kuwait, Kingdom of Saudi Arabia.. and a couple of countries in North Africa.

Used Machines Offers - Through our Associates - We offer Pre and Post Sales Services for Used machine Deals (Relocation, Installation, Alignment, Trials,Yearly Breakdown/Maintenance Servicing contract")

Lathe-conv.
CNC spares
Shearing
Plate Rolls
HMC/VMC
Horiz.Borer
Steel Fab M/c
VTL
Press Brakes
CNC Mills
SellDeadCNCto>us
Retrofit DeadCNC

Lathe> LZ-Drehmaschine GIANA FRATELLI GFP-14 [760x6000, Dreh-Æ über Bett/Support 1520/1070][2-Achsen Digitalanzeige, n = 4-400, Spindelbohrung 150][3-Backenfutter SMW Æ800,Reitstock][feste & mitlaufende Lünette, Kühlmitteleinrichtung][Bj. 1976]

WE have on stock "Siemens" "Fanuc" Heidenhain - New and Obsolete Spare parts- Controls. Drives. Cards. Encoders. Contact us via mail with your Desired part number.

LVD Hydraulic Shear -3meter x8mm heavy duty -Price: 8500 EURO ex-site

Type:SBC-08 ][Serial No.#2178][Capacity:3000x8mm][Power back-gauge: 1000mm][Manual blade gap adjustment: 2 °][Strokes/min: 20

Main motor: 25HP][Weight: 8500Kg][Front arm support:1500mm]

We have a beautiful Plate rolling machine that Steel Fabricators Middle East market would find very useful. We do not own this machine, The machine is in Stock with one of our Associate - We offer Pre and Post Sales Services for Used machine Deals (Relocation, Installation, Alignment, Trials,Yearly Breakdown/Maintenance Servicing contract")For details send Enquiry or Email with your contact detail

For details send Enquiry or Email with your contact details

We have these Machining Centers(HMC/VMC) available that Precision parts mfgrs in Middle East market would find very useful. We do not own these machine, The machine is in Stock with one of our Associate - We offer Pre and Post Sales Services for Used machine Deals (Relocation, Installation, Alignment, Trials,Yearly Breakdown/Maintenance Servicing contract")For details send Enquiry or Email with your contact detail

Mikron CNC Vertical Machining Centre with full 4th axis and motorized head; Only 4300 Spindle hours!!
Model: UCP1000 ; Control: Heidenhain 426 ; Year:1999 ; CNC Rotating table size: 1000mm ; Travel XYZ:1000x1000x875mm (655mm in vertical position) ; Max.Spindle speed: 15000rpm ;Spindle taper: HSK63A ; Toolchanger: 60atc ; With motorized head for vertical/horizontal positioning
Swarf conveyor, coolant through spindle ; Price: 66000 EURO ex-site or best offer + Buyer Pays our Finder Fee.

CNC-HORIZONTAL-MACHINING-CENTER -HECKERT CWK 400 D; Control: SIEMENS 840 D, NEW CPU, UPDATE in 2005

The machine is in excellent condition, geometrically in mint condition-Price: EURO 59.000,00+ Buyer Pays our Finder Fee.

used / year of manufacture 1998;CNC-Horizontal-Machining-Center - Manufacture HECKERT - Type CWK 400 D;Traverse path: X / Y / Z: each 650 mm / Spindle: HSK 63 / up to 15.000 rpm.,rated power: 31 kW / B-axis / NC-round table: 360.000 degree / 2 pallets 400 x 400 mm;Tool changer: sixtyfold (60-fold) / Chip conveyor / Internal film cooling with high-pressure pump 50 bar;Coolant device / Electronic hand wheel / Laser measurement in 2010 à max. deviation: 1,32 µm

TOS Horizontal Borer -Model:WH63 Year:1968 [Price: 12500 EURO or best offer]

Table:800x890mm ;Spindle diameter:63mm;Spindle taper:MK4;Spindle speeds:18-1800rpm;Spindle travel:560mm;Longitudinal travel:1000mm Cross travel:1000mm Vertical travel:710mm;Between centres:1850mm;Main motor:5.5kW;Complete with facing head, milling head, tailstock and manuals

Sheet metal levelling machine FRORIEP 25x3100;Made in 1981;Country of origin: Germany

The price is 75.000 EUR FCA.[All manuals and plate of this machine are missed- but we can rebuild the machine at extra charges]

Specification:

Max sheet width: 3100 mm;Sheet thickness: -Min: 5 mm -Max: 25 mm;Working rolls: 7;Working roll diameter: 300 mm;Back-up rolls: hydraulic

Main motor power: 52 kW;Electricity: 220 V; 50 Hz;Weight: approx. 60 ton

We have Avaialble a VTL Vertical Lathe -Make BREUER Typ BK16U, new in 1964(Face plate dia. 1.600mm, max. turning dia. 1.850mm max. Turning high 1.100mm ) for Middle East Customers. We also offer services for Installation, commissioning and yearly service/maintenance contract for this machine. The machine is available through our Associates.

We have available Vertical lathe Toshiba 8000 mm through our associates in Russia

WEBSTER + BENNETT Vertical Turning Lathe - Model:36" ;Price: 10000 EURO

4-jaw Chuck diameter:914mm ;With 5-position toolholder ;Speeds:5.6-125rpm;Horizontal travel:750mm ;Vertical travel:545mm ;Max.turning diameter:1150mm;Max.workpiece height:660mm ;Complete with SONY DRO;

Hydr. Abkantpresse LOTZE PZ 300; Bj. 1967; Price -EUR 20.900,00

[300 Ton 4000 mm Hydr. Press Brake]

300to, Abkantlänge 4000mm, Durchg. zw. St. 3500mm;kompletter Satz Abkantwerkzeuge, 2 Hand- & Fußbedienung;Die Maschine besitzt keinen Hinteranschlag

MECOF CS 500 Agile-Price asked 142.000,-EU

YoM 1997 ; X = 6.000 mm;Y= 1.000 mm;Z= 1.700 mm ;Table fixed-X = 7.300 mm x 1.090 mm x 900 mm ;Feedrate = 0 – 20.000 mm/min

Indexing milling head 1° TBA4;Spindle DIN ISO 69871-A;Spindlepower 24 kW;Spindlespeed 15-4.000 rpm;Elektrospindle E 28;15 kW Spindlepower;12.000 – 21.000 rpm;HSK-50E;Coolant Tank IRT 3;Capazity 1000 + 1000 ltr; ;ATC Chain type-41 tools ISO 50;ATC Random disk for electro spindle-12 tools HSK 50E-

Additional Angles and fixture cube Renishaw touch probe system Price asked 142.000,-EUR net with all mentioned equipment.

BOKÖ 5 Axis VH 4/ 15 milling machine-Price – 172.000,- EUR net. YoM 1991; X= 3.000 mm;Y=1.400 mm;Z=1.500 mm;Fidia CNC 20;5 axes milling head;Rotary table ;Price – 172.000,- EUR net.

CNC Bettfräsmaschine LAGUN FBF 1800 ; Bed Type Milling Machine;- EUR 29.900,00 Heidenhain TNC 360,Univ Kopf, hydr Werkzeugspannung;1700/600/600 X/Y/Z.;Bj. 1994

We are buyers for Stocks of Secondhand Machine - with Faulty Electronics/ Dead CNC Controls. If you have any Dead/ Faulty Machines- Metalworking- CNC Lathes/ CNC Mills/ CNC VMCs / Profile Cutting machines- Plasma/Oxyfuels/Waterjet, Wood Routers, Synchro Press Brakes/Folders- contact us with PRICE/ Photos and specs. We probably can make a deal.

The machines that interest are the one's having Good Mechanical system, and available cheap. If We have several machines of the Same Model type that suits us MOST

We are a company engaged in Import of Used Machines that we upgrade with Latest CNC Systems, and sell locally & in Asian Market. We Replace/Retrofit Obsolete controls of Used Metalworking/ Metalforming/ Profile Cutting machines with New CNC Control system.

If you wish to Subcontract the Retoriftting work to us, You are Welcome to discuss the Deal. It makes great business sense to get your Machines Retrofitted in a Place with Cheap labour and Free Export/ Import Policy as Dubai. We have company in FREE ZONE thus no Taxation Issues.

We hold Industrial license-Machine Refurbishing, that allows us to freely import/ export machinery.We can import your OLD machines, Retrofit here and send it back for you,to sell and make profit or route the machine to your End user. Send in the machine details and we workout a proposal for you.

IF you have several machines of same model, this is good Business, as retrofit cost comes down drastically.

Productivity Improvement Automation solutions for "Industrial Machines"

Sinumerik CNC

Upgrade your Obsolete CNC Controls Economically : Controls available from Stock at UAE

Sinumerik 802C and Sinumerik 802D; Sinumerik 802D Baseline, CNC Controls from Ready stock : Ready for Replacing your Obsolete CNC Control on your CNC Milling Machine or CNC Lathe Machine.SINUMERIK 802C base line — the ideal solution for low-cost applications This control can be used with Existing AC/DC Analog Drives. The SINUMERIK 802C base line comes with the operator panel control and all components required, including NC, PLC, relevant inputs, outputs and software. Designed for a maximum ofthree servo feed axes and one analog spindle, the SINUMERIK 802C base line uses the traditional +/- 10 V interface . Send us Mail to know More or Enquiry

SINUMERIK 802D / SINUMERIK 802D base line -The completely digital control for simple CNC

With the SINUMERIK 802 control systems, you can control up to four axes and one spindle. The SINUMERIK 802D is also applicable for lathes with driven tools, and the SINUMERIK 802D base line for two axes and one spindle.

We also have from stock Sinumerik 802D; PP48/72 Modules, Simodrive Baseline, Simodrive Infeed Modules (6SN1145 series), Simodrive Power Modules Control Cards (Resolver/Encoder- Inc. Abs encoders etc.) and 1FT5, 1FT6, 1HU (obsolete type) or Newer 1FK6/1FK7 series Servo motors. The items not in stock are arranged quickly from our New Delhi Stock..Delivery to Any country in Middle east within Maximum a Week's Time.